Xiao Bian once fantasized how cool the Apple logo on the iPhone body could be. Now that this has become a reality, the domestic Huaqiang North's mobile phone repair shop has provided such a retrofit service. A foreign netizen also personally experienced a handful and praised the craftsmanship of the mobile phone repair shop.
The first step of the conversion is naturally disassemble. First remove the two screws on the bottom of the iPhone X, then carefully open the display, and then disconnect the cable between the screen and the motherboard of the mobile phone.
After doing the above steps, you need to find the positive side of the hidden cable inside the screen. This can only be done with a digital microscope. This positive electrode is to prepare for the subsequent connection of the LED lamp.
The next step is to prepare LED lights that can emit light. The refitting staff cut a piece of opaque silver plastic paper using the pre-prepared iPhone apple logo template, and then cut and overlaid a translucent plastic sheet to overlap the two. He then glued the two previously tested LED lights to one side of the plastic sheet and connected the wires.
Before affixing the LED light to the iPhone X apple logo, you also need to remove the main and sub boards and batteries inside the iPhone X body, expose the glass back plate and scrape off the silver coating to make the apple logo transparent. After sticking, the refitting staff also covered a piece of black paper on the plastic sheet to prevent the leakage of light inside the body when the LED lamp was shining.
With the above steps ready, I started assembling the iPhone X. Lead the wires on both sides of the LED lamp from the holes in the back of the camera to the inside of the camera body. Connect one lead wire to the positive electrode of the concealed cable that was found on the screen and connect the other to the battery.
After completing the conversion, as long as you light up the screen, then the apple logo on the back of the fuselage will glow, and the off-screen logo will also be extinguished. Simply speaking, the above operation is still a certain degree of difficulty, so do not try it yourself. If you want to eat fresh, you can go to Huaqiang North and look for the relevant shop.
Fog Light Wire Harness are most used in automotive,motocycle,bus,bike,truck,LVDs,medical equipment.
Yacenter has experienced QC to check the products in each process, from developing samples to bulk, to make sure the best quality of goods. Timely communication with customers is so important during our cooperation.
If you can't find the exact product you need in the pictures,please don't go away.Just contact me freely or send your sample and drawing to us.We will reply you as soon as possible.
Fog Light Harness,Fog Light Wiring Kit,Universal Fog Light Wiring Harness,Fog Light Wiring Harness
Dongguan YAC Electric Co,. LTD. , https://www.yacentercns.com