Web video easily "extract"

Sometimes we need a certain part of a complete video on a website. Generally, we download it and then use “VideoStudio” to intercept it. However, online video downloads are generally cumbersome and require video clip processing. The workload is still rather large and difficult. In fact, we only need to use Camtasia Studio (hereinafter referred to as CS) to record the required video clips.

Determine the screen recording range

First install and start Camtasia Studio, then open the web link (for example, "http://g.beva.com/gushi/xiao-zhao-ma-ma.html#651") where you want to record the web video, and then click The play button in this webpage looks at the video to determine the recording range of the video screen. Then in CS, click on the menu "Tools → Record Screen" command in order to bring up the "Record Screen" panel (Figure 1). You can pause the playback of the recorded video first, and then you can “define” the recording range of the video by adjusting the size of the green dotted rectangle.

hint:

For the CS "Record Screen" panel shown in Figure 1, the "dimension" parameter defaults to the rectangle size of the scaled recording screen range. It is highly recommended that you click the "Lock" icon to the right of the "dimension" parameter to cancel the limit. , so you can adjust the range of the recorded video as you like, so that you can not only mask the video Logo, and make the recorded video around there is no black edge and other shortcomings.

Record video clips

In the web browser, press the F5 key to refresh the page where the recorded video is located. Then in the CS "record screen" panel, click the red "rec" button on the far right side. CS will have a The 3 second countdown reminder message reminds us to automatically start recording the screen video after 3 seconds. In the last second of the countdown, the “play” button in the webpage where the recorded video is located is simultaneously pressed, making the video playback and the screen recording. At the same time.

When the video clip you want to record has finished playing, press the F10 key, CS will stop the video recording operation (Figure 2). CS will automatically play the recorded video. If you feel satisfied, click the "Save and Edit" button and follow the prompts to save the recorded video material to any position on the hard disk.

hint:

1. When recording video, be sure to make the "Audio" parameter in the "recording screen" panel of Figure 1 in the "on" state, otherwise the recorded video has no sound. Of course, the "Audio" parameter is not "enabled". You can click the triangle to the right of the parameter and select "Record system audio" so that when the video is recorded, you can record the sound from the sound card.

2. When recording a video in a web page, it is recommended that everyone turn the system's volume to the maximum to ensure that the sound in the recorded video is sufficiently clear (if the video is too loud during recording, the speaker can be turned off. In a quiet state, record the sound from the sound card.)

3. Export the recorded video

After the video material is recorded and saved, CS will automatically load the recorded video material (Figure 3). Click the menu "Generate and share" to open the "Generate Wizard" dialog box (Figure 4). Click on Figure 4 Pull down the arrow and select "MP4 only (up to 720p)". Finally, click the "Next" button, follow the prompts to specify the location of the MP4 video generated, CS will record the video material to generate MP4 format video.

After completing the above operations, wait a few moments to find the generated MP4 video file in the specified video save location (such as "C:\Users\syhl777\Documents\Camtasia Studio\Own-Looking Mom" ​​directory).