With the Internet of Things, it is the fifth-generation mobile communications, which is 5G that the communicators say, but it has only entered into commercial mobile communications 5G since 2020, and 5G WiFi already has faster transmission rates and greater coverage. Widely recognized by the market. Then the question is, what is the difference between 5G mobile communication and 5G WiFi?
5G
From the definition, the fifth-generation mobile phone mobile communication standard, also known as the fifth-generation mobile communication technology, is an extension after 4G; 5G WiFi refers to the WiFi operating in the 5Ghz band using the 802.11ac protocol. The WiFi protocol standards include 802.11a (first generation), 802.11n (fourth generation, simultaneously operating at dual frequency bands of 2.4Ghz and 5Ghz) and 802.11ac (fifth generation), and only WiFi with 802.11ac is the real 5G. WiFi).
Evolution of WiFi Protocol Standards
From the perspective of transmission rate, 5G mobile communication can reach 10Gbps, which is 10 to 100 times faster than 4G network. It solves the demand for massive wireless communication and will realize true “all things interconnectionâ€; the entry-level speed rate of 5G WiFi is 433Mbps. This is at least three times the current WiFi speed, and some high-performance 5G WiFis can reach more than 1Gbps.
From the perspective of application scenarios, after the commercialization of 5G mobile communications , 5G application scenarios with continuous wide-area coverage, hot-spot high-capacity, low-power large-connection, low-latency high-reliability can be implemented. Mobile Internet and the Internet of Things are the two major driving forces for the development of mobile communications in the future, and will provide broad prospects for 5G, such as mobile internet, vehicle networking, smart home, industrial control, and environmental monitoring, and other Internet of Things applications; currently SKYLAB's 5G WiFi The modules are dual-band WiFi modules that can cover both the 5GHz and 2.4GHz frequency bands at the same time. Compared to 2.4G single-band wireless routers, the modules have higher wireless transmission rates, stronger immunity to interference, and stronger wireless signals. It is more stable and not easily dropped. Therefore, it is widely used in 802.11ac WiFi APs, routers, IOTs, network service routers, home security gateways, hotspot sharing, USB storage sharing, and SD card data sharing. Higher speed WiFi solution.
5G WiFi module selection table:
5G WiFi module
More support for 5G dual-band WiFi module performance parameters and selection applications can directly visit the SKYLAB official website or Ali store.
2.0mm Wire To Board Connectors
Overview of 2.0mm Pitch Wire To Board Connectors
The 2.0 mm PH connector is a low- profile and compact component delivering dependable service in requirements for high density connection to printed circuit boards.
Designed harsh environments which are frequently subjected to heat and vibration such as in heavy equipment vehicles and batteries
Delivers up to a current rating of 2.0 A and 250 V, applicable for American Wire Gauge (AWG) #24, #25, #26, #27, #28, #30, #31, #32.
Enclosing this connector is a crimp style lock designed by Antenk and a special configuration which prevents users from inverted insertion.
General Specifaction 2.0mm Wire To Board Connectors
Contact Pitch 2.0mm
No.of Contacts 2 to 16 positions
Current 2A (AWG #22 to #28)
Compatible Cross Jst PH Connector Series
Current Rating: 2A
Voltage Rating: 250V
Temperature Range: -25°C~+85°C
Contact Resistance: 20m Omega Max
Insulation Resistance: 1000M Omega Min
Withstanding Voltage: 800V AC/minute
Advantages 2.0mm Wire To Board Connectors
2.0 mm pitch serves as the best choice for densely crowded electronics systems for its small, square-edged configuration, ruggedized and shock resistant feature.
Caters Power, Signal and Grounding Contact Needs
This connector can either stand as power contacts, signal contacts or both as power and signal contacts or a signal and grounding contact. The wiring harness interconnects the PCB to various components that sends signals and power to other electronic devices.
Safe and Reliable
2.0 mm pitch connectors ensures safety, system protection and performance with its bonded metallic conduits and multiple grounding points preventing fire hazards, component damage, overheating and possible electrocution.
ROHS Compliant
The product does not contain restricted chemicals in concentrations not complying with ROHS standards. Thus, for its components, the products can be worked upon at high temperatures required by lead-free soldering.
Features and Benefits of 2.0mm Pitch Wire To Board Connectors
Smallest pitch for positive lock Wire-to-Board crimp system
Provides space savings for mounting other components
mating retention with low mating and unmating forces
Wide header variations to provides customers with many choices and design flexibility
Easy to mate and unmate
Space saving SMT Mounting that provides assembly and cost efficiencies
Automated assembly reduces manual labor processes
Application industry of 2.0mm Pitch Wire To Board Connectors:
Automotive
Electronic modules
Consumer
Air conditioner Mobile POS terminals Notebook PCS mart meters TVs Televisions UAVs/Drones
Industrial
Servo motor
Medical
Patient Monitor
This is not a definitive list of applications for this product. It represents some of the more common uses.
Led Connector,2.0Mm Wire To Board Connectors,2.0Mm Pcb Wire To Board Connector,2.0Mm Pin Wire To Board Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com