60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty

Model NO.: TP-SLS-1540-60
Certification: CCC, CE, C-tick, EMC, ETL, FCC, LVD, REACH, RoHS, SAA
Voltage: 90-260V
Beaming Angle: 25, 60 , 90, 120 Degrees,Asymmetric, Double-Asymme
LED Chips: Epistar
Wiring: Pre-Installation Wiring, Connect with Connector
Suspension Cord: Including Suspension Cord Cost
Trademark: topenergys
Transport Package: 10PCS/Carton
Specification: 1474*390*220mm
Origin: China
HS Code: 94054090
Model NO.: TP-SLS-1540-60
Certification: CCC, CE, C-tick, EMC, ETL, FCC, LVD, REACH, RoHS, SAA
Voltage: 90-260V
Beaming Angle: 25, 60 , 90, 120 Degrees,Asymmetric, Double-Asymme
LED Chips: Epistar
Wiring: Pre-Installation Wiring, Connect with Connector
Suspension Cord: Including Suspension Cord Cost
Trademark: topenergys
Transport Package: 10PCS/Carton
Specification: 1474*390*220mm
Origin: China
HS Code: 94054090
LED LINEAR TRUNKING SYSTEM
 
The LED Linear Trunking System is a continuous LED lighting system.
All system components, trunking rail and luminaire inserts are perfectly matched according to 1500mm/600mm system dimensions.
Triple, double and single-length rails can be combined to comply with the space involved.

60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
 
FEATURES:
 
  • Low installation cost - everything in one box and installation is tool-less
  • The high light efficiency of 130 lm/W makes reduction on energy consumption and additional cost
  • Ra >80
  • CCT: 3,000K/4,000K/5,000K/6,000K
 A wide range of optics from 30° to 120° distribution, as well as asymmetric and double asymmetric distribution
  • Emergency versions available
  • Dimming versions available
  • Different length with various power is available
  • X, L and T Standard Module Node connectors with electrical feed-in and feed-out
  • Mounting Options: chain suspended, cord suspended, rod suspended or surface mounted
  • Colour scheme:  White
 
APPLICATIONS:
 
  • Commercial
  • Industrial
  • Warehouse
  • Other indoor lighting
 
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty

Technical Data Sheet
 
Light Housing
Material Aluminum profile
Colour scheme White 
Installation type Rotatory knob or holding clamp
Dimensions( Length x Breadth x Height) 1,435 x 70 x 70mm
Weight Approx.4 kg
Protection type IP20
Illuminant properties
Illuminant Type LED-Moduls with Mid-Power-LEDs
Optical System Wide,Narrow,wide,Flat and double Asymmetric light distribution
Luminous Flux 7,200lm - 7,800lm
Luminous Output 120lm/w -130lm/w (Customized)
Colour Temperature 3,000K / 4,000K / 5000K / 6000K
Colour Rendering Index(Ra) > 80
Dimming( Power control) With / without DALI
Lifetime at (ta)30° 50,000 h
Electronic Properties
Power Rating 60W
Protection class SKI
Operating voltage 100 - 240V AC
Frequency 50 / 60 Hz
Installation Requirements
Application areas Halls,warehouses,manufacturing facilities,sales premises
Specific Installation Rail- Light System
Installation height 3 to 20m
Permissible ambient temperature (ta) 30° -25ºC to +35ºC
Other properties
Certification CE / TUV / SAA / UL
Connection with circuit breaker (B16) 150 Pcs
Special features
End cover IP20
Blind cover 1,435 mm
Mounting Rail 1,435 mm
 
 
 
 
 
Node Connector
 
All system components can be combined without tools. X, T and L connectors   expand the system's application range.
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
Each node connector has diverse of electrical feed-in and feed-out. The node connector is not only to  connect the cross trunking,
but also to connect the wire inside the trunking, and the node connector itself could even be the electricity feed-in point.
 
 
Illuminated modul
 60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty

 Connect with each other in series.
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
General safety instructions and information
 
Installation and maintenance must be performed by authorised and trained staff.
- Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
de-energised (e.g. prevent switching back on).
- Observe your national safety regulations for the installation and use of this lamp.
- The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
- If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
- To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
to the connecting cable.
- Only the manufacturer is authorised to replace defective components.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similarly qualified person.
+ All dimensions stated in mm.
+ The drawings are not to scale.
+ Technical changes are reserved.

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connect with each other in series.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  • General safety instructions and information
 
  • Installation and maintenance must be performed by authorised and trained staff.
  • - Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
  • de-energised (e.g. prevent switching back on).
  • - Observe your national safety regulations for the installation and use of this lamp.
  • - The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
  • - If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
  • - To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
  • to the connecting cable.
  • - Only the manufacturer is authorised to replace defective components.
  • - The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
  • similarly qualified person.
  • + All dimensions stated in mm.
  • + The drawings are not to scale.
  • + Technical changes are reserved.
 
 
 
 
 
 
 
 
 
LED LINEAR TRUNKING SYSTEM
 
The LED Linear Trunking System is a continuous LED lighting system.
All system components, trunking rail and luminaire inserts are perfectly matched according to 1500mm/600mm system dimensions.
Triple, double and single-length rails can be combined to comply with the space involved.

60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
 
FEATURES:
 
  • Low installation cost - everything in one box and installation is tool-less
  • The high light efficiency of 130 lm/W makes reduction on energy consumption and additional cost
  • Ra >80
  • CCT: 3,000K/4,000K/5,000K/6,000K
 A wide range of optics from 30° to 120° distribution, as well as asymmetric and double asymmetric distribution
  • Emergency versions available
  • Dimming versions available
  • Different length with various power is available
  • X, L and T Standard Module Node connectors with electrical feed-in and feed-out
  • Mounting Options: chain suspended, cord suspended, rod suspended or surface mounted
  • Colour scheme:  White
 
APPLICATIONS:
 
  • Commercial
  • Industrial
  • Warehouse
  • Other indoor lighting
 
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty

Technical Data Sheet
 
Light Housing
Material Aluminum profile
Colour scheme White 
Installation type Rotatory knob or holding clamp
Dimensions( Length x Breadth x Height) 1,435 x 70 x 70mm
Weight Approx.4 kg
Protection type IP20
Illuminant properties
Illuminant Type LED-Moduls with Mid-Power-LEDs
Optical System Wide,Narrow,wide,Flat and double Asymmetric light distribution
Luminous Flux 7,200lm - 7,800lm
Luminous Output 120lm/w -130lm/w (Customized)
Colour Temperature 3,000K / 4,000K / 5000K / 6000K
Colour Rendering Index(Ra) > 80
Dimming( Power control) With / without DALI
Lifetime at (ta)30° 50,000 h
Electronic Properties
Power Rating 60W
Protection class SKI
Operating voltage 100 - 240V AC
Frequency 50 / 60 Hz
Installation Requirements
Application areas Halls,warehouses,manufacturing facilities,sales premises
Specific Installation Rail- Light System
Installation height 3 to 20m
Permissible ambient temperature (ta) 30° -25ºC to +35ºC
Other properties
Certification CE / TUV / SAA / UL
Connection with circuit breaker (B16) 150 Pcs
Special features
End cover IP20
Blind cover 1,435 mm
Mounting Rail 1,435 mm
 
 
 
 
 
Node Connector
 
All system components can be combined without tools. X, T and L connectors   expand the system's application range.
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
Each node connector has diverse of electrical feed-in and feed-out. The node connector is not only to  connect the cross trunking,
but also to connect the wire inside the trunking, and the node connector itself could even be the electricity feed-in point.
 
 
Illuminated modul
 60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty

 Connect with each other in series.
60W 5FT LED Linear Rail Trunking Lamp Fixture with 5 Years Warranty
General safety instructions and information
 
Installation and maintenance must be performed by authorised and trained staff.
- Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
de-energised (e.g. prevent switching back on).
- Observe your national safety regulations for the installation and use of this lamp.
- The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
- If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
- To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
to the connecting cable.
- Only the manufacturer is authorised to replace defective components.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similarly qualified person.
+ All dimensions stated in mm.
+ The drawings are not to scale.
+ Technical changes are reserved.

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Connect with each other in series.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  • General safety instructions and information
 
  • Installation and maintenance must be performed by authorised and trained staff.
  • - Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain
  • de-energised (e.g. prevent switching back on).
  • - Observe your national safety regulations for the installation and use of this lamp.
  • - The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
  • - If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
  • - To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular
  • to the connecting cable.
  • - Only the manufacturer is authorised to replace defective components.
  • - The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
  • similarly qualified person.
  • + All dimensions stated in mm.
  • + The drawings are not to scale.
  • + Technical changes are reserved.
 
 
 
 
 
 
 
 
 

USB2.0 Series

USB 2.0 Printer Cable,USB 2.0 Cable,USB 2.0 Harness,USB Extension Cable

Dong guan Sum Wai Electronic Co,. Ltd. , https://www.sw-cables.com