When Scaler IP is simulated, all output data is 0. What is going on?

Background: A recent customer used ScalerIP in Vivado to design and encountered a strange problem. The process is like this. In order to get familiar with the usage of scalerIP as soon as possible, he built a basic simulation environment in vivado. The scalerIP is configured into a 1:1 amplification mode, fixed resolution, fixed parameters, and input and output are all axistream interfaces. But when the simulation environment ran, he found that although the input and output axi-stream control signals (including valid, ready, sof, last signals) are normal, the output data is always 0.

I first helped the customer check the input and output axi-stream control signals, confirming that these signals are correct, as follows. That means the problem may be in the configuration of the IP.

ScalerIP usage problem – When Scaler IP is simulated, all output data is 0. What is going on?

The customer's IP configuration interface is as follows, the problem is leaked out, the original customer did not set the filter coefficient initialization file, so that all the filter coefficient values ​​are 0, of course, the final output is also 0.

ScalerIP usage problem – When Scaler IP is simulated, all output data is 0. What is going on?

Xilinx's Scaler IP provides a default set of filter coefficients for customers to choose from. You can choose the following settings in the CoefficientFile column:

ScalerIP usage problem – When Scaler IP is simulated, all output data is 0. What is going on?

Of course, users can also design their own filter coefficients to use. The effect of Scaler IP on image enlargement and reduction has a direct and direct relationship with the filter coefficients. How to design suitable filter coefficients requires a deep theoretical foundation of digital signal processing!

KNM1 Series Moulded Case Circuit Breaker

KNM1 series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.

Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .

KNM1 series Molded Case Circuit Breaker,KNM1 series Small Size Molded Case Circuit Breaker,KNM1 series Electrical Molded Case Circuit Breaker,KNM1 series Automatic Molded Case Circuit Breaker

Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjthermalrelay.com