In recent years, the drone heat has continued to heat up rapidly. This emerging civilian intelligent hardware market has attracted many entrepreneurs to get involved. As the new drone market, Ghost, the first drone product released by Yihang last year, has been well received since its launch. This year, E-Air released the world's first intelligent drone GHOSTDRONE 2.0 that combines mobile automation with simple control and VR glasses to create an immersive aerial photography experience. As the first combination of VR and drones, what about GHOSTDRONE 2.0? The author will take everyone to see it.
GHOSTDRONE 2.0 design
First of all, let's take a look at the unpacking chart. After opening the box, GHOSTDRONE 2.0 is quietly lying in the center of the box. The overall layout is simple and clear. The internal structure of the box is high, which can play the role of the overall support skeleton. Man-made luggage, used to fix aircraft and propellers, easy to carry and transport.
Unpacking
The kit includes: 1 drone, 1 set of VR glasses (the flagship version) / 1 G-BOX communication box (PTZ version), 4 propeller protection rings, 8 propellers, 1 battery, 1 battery charging , 1 manual, 1 kit (motor wrench, screwdriver, spare pan/tilt ball, spare screw, charging cable)
List of main components
GHOSTDRONE 2.0 is designed with a sleek, streamlined design that reduces the wind resistance of GHOSTDRONE 2.0 in large maneuvers. Improve flight performance by reducing the cross-sectional area as much as possible.
GHOSTDRONE 2.0 Curve Design
The GHOSTDRONE 2.0 features an all-in-one spherical camera with a lightweight pan/tilt design. The PTZ+ camera has a total weight of only 160g and is very lightweight. The lightweight size also greatly enhances the stability of the flight and the shooting performance of the camera. In addition, GHOSTDRONE 2.0 also adopts a safe and stable supporting platform structure and ultra-thin drive motor, which reduces the risk of falling off and increases the flight quality.
Cloud platform and spherical camera
In terms of propellers, according to official sources, GHOSTDRONE 2.0 uses a model 8555 two-leaf self-tightening paddle. This self-tightening paddle can effectively reduce the fine vibration generated during flight. Make flight performance more stable. In addition, the self-spinning design can be easily disassembled and installed, and the blade can be easily installed according to the rotation of the opening and closing lock patterns on the propeller blade. The GHOSTDRONE 2.0 propeller features a lower rotor design that provides a complete aerodynamic distribution that does not block the airflow and loses power. The lower rotor design allows the propeller to "push" the body, eliminating the risk of "shooting" in a large maneuver, high load, and complex environment compared to the "rotating" body of the upper rotor design. The lower rotor design is naturally rainproof and can fly all day. According to the author's pro test, the flight in the light rain is very stable and basically has no effect.
Model 8555 two-leaf self-tightening paddle
Design the propeller with the lower rotor that can fly in the rain
Front battery
GHOSTDRONE 2.0 uses 14.8V 4500mAh smart lithium battery, the maximum hovering for 25 minutes, can be filled with fast charging technology for 70 minutes, the total capacity is 67Wh. According to the author's pro test, the flight time is about 20 minutes. The battery panel has a small display that not only displays the battery voltage, the remaining percentage of the battery, the capacity information, but also the voltage of each cell, the current, and the number of charge and discharge cycles. The display is very comprehensive:
Can be transmitted over the data line
Spherical camera TF card
Yuntai shock absorber ball
3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.
3D Printing Motor product introduction:
The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.
Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;
Simplify design and save space.
Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range
Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
3D Printing Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
3D Printing Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of 3D Printing Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com