Outdoor water pump adapter installation process

1. The setting of the water pump adapter should firstly ensure the connection of the fire truck water pump; secondly, it should consider the fire water source within the range of 15-40m of the water pump adapter; some water pump adapters are located at the corner, the trench, and the corner Not only is the position not obvious, but the fire truck is not accessible at all, and it is extremely inconvenient to operate. Some water pump adapters are simply in the middle of the road, and the store door, although meeting the requirements, obviously hinders traffic.

2. When connecting the water pump adapter to the indoor ring network, it should be far away from the joint between the fixed fire pump water outlet pipe and the indoor pipe network, and several water pump adapters should not be connected in parallel at a certain joint of the fire water supply pipe network.

3. The accessories on the pump adapter have check valves, safety valves, gate valves and drain valves. The lack of any accessories will make the pump adapters unable to function properly in the event of a fire.

4. When using the water pump adapter, we only need to connect the external fire-fighting equipment to the normal use. Note that the pipe of the adapter must be connected to the pipeline inside the room.

5. Note that when installing the water pump adapter, clean the inside of the pump, do not block the inside of the pipe, it is easy to cause him to not work.