Cat 5e FTP Patch Panel 24 Ports (HSC-2055222-24)

1, Meet the T-568A 6 transmission standards, in line with T568A and T568B wire order for horizontal cabling termination devices or equipment, and the focal point of interaction with termination.
sturdy design and easy to install, reducing installation and operating costs, a larger positive identification space easy port identification, easy to manage. In line 19 & quot; standard rack-mount, 1U height.

2, product design class: Class 2 universal connector

3, connection type mechanism: bayonet coupling / separation

4, connection: RJ45 jack with a jumper, IDC termination horizontal or vertical wiring.

5, lead-free requirements: meet the ROHS standard

6, the material Description: The product is used to connect patch panel building backbone cabling, campus backbone cabling and active equipment, mainly used for circuit-switched communications equipment and other electronic devices connection. Products equipped with mating coaxial cable to twisted pair cable and coaxial jumpers.

7, interworking relationship: the same series of standard connectors using the interworking

8. Applicable standards: Generic specification: YD / T 926.1 Surface Treatment: A, metal materials: iron: iron frame, spray, black wire IDC Terminal: Phosphor bronze nickel plated B, non-metallic materials: Plastic: RJ45 modular jack as PBT engineering plastics, PC polycarbonate, ABS plastic

introduction

1) Electrical characteristics:

A, frequency range: 0 ~ 250MHz

B, Operating voltage: 125 V

C, pressure: 750 V

D, Insertion Loss: 0.4dB 250MHz

E, the insulation resistance: Initial value ≥100MΩ

2) Mechanical properties:

A, insertion and extraction force: insertion force of not more than 20N, 20N pull force is not less than the effect of connector apparatus: 50N 60 ± 5s

B. Environmental performance:

1) Temperature: -25 ~ + 70 ºC

2) Humidity: ≤85% (temperature 85 ºC ± 3 ºC)

3) salt spray test:

A, before the atomized salt solution PH value in the 6.5 ~ 7.2 (35 ± 2 ºC) between;

B, the use of sodium chloride salt solution (chemically pure, analytical grade) and distilled or deionized water at a concentration of (5 ± 0.1)% (weight percentage);

The C, continuous atomization, the recommended duration of 48h;

D, the conditions must be prevented oil, dust and other impurities and spray air temperature and humidity workspace atomization.
1, Meet the T-568A 6 transmission standards, in line with T568A and T568B wire order for horizontal cabling termination devices or equipment, and the focal point of interaction with termination.
sturdy design and easy to install, reducing installation and operating costs, a larger positive identification space easy port identification, easy to manage. In line 19 & quot; standard rack-mount, 1U height.

2, product design class: Class 2 universal connector

3, connection type mechanism: bayonet coupling / separation

4, connection: RJ45 jack with a jumper, IDC termination horizontal or vertical wiring.

5, lead-free requirements: meet the ROHS standard

6, the material Description: The product is used to connect patch panel building backbone cabling, campus backbone cabling and active equipment, mainly used for circuit-switched communications equipment and other electronic devices connection. Products equipped with mating coaxial cable to twisted pair cable and coaxial jumpers.

7, interworking relationship: the same series of standard connectors using the interworking

8. Applicable standards: Generic specification: YD / T 926.1 Surface Treatment: A, metal materials: iron: iron frame, spray, black wire IDC Terminal: Phosphor bronze nickel plated B, non-metallic materials: plastic: RJ45 modular jack as PBT engineering plastics, PC polycarbonate, ABS plastic

introduction

1) Electrical characteristics:

A, frequency range: 0 ~ 250MHz

B, Operating voltage: 125 V

C, pressure: 750 V

D, Insertion Loss: 0.4dB 250MHz

E, the insulation resistance: Initial value ≥100MΩ

2) Mechanical properties:

A, insertion and extraction force: insertion force of not more than 20N, 20N pull force is not less than the effect of connector apparatus: 50N 60 ± 5s

B. Environmental performance:

1) Temperature: -25 ~ + 70 ºC

2) Humidity: ≤85% (temperature 85 ºC ± 3 ºC)

3) salt spray test:

A, before the atomized salt solution PH value in the 6.5 ~ 7.2 (35 ± 2 ºC) between;

B, the use of sodium chloride salt solution (chemically pure, analytical grade) and distilled or deionized water at a concentration of (5 ± 0.1)% (weight percentage);

The C, continuous atomization, the recommended duration of 48h;

D, the conditions must be prevented oil, dust and other impurities and spray air temperature and humidity workspace atomization.

Silicone Keyboard

Nantong Boxin Electronic Technology Co., Ltd. , https://www.ntbosen.com