First of all, you can use the rack to dissipate heat, put a stand at the bottom of the TV box, cheap and easy to use, if you can't find it, you can use iron wire to make one, as long as you can ensure that the box can be placed smoothly.
Once again, fans can be used to dissipate the heat, aiming the fans at TV boxes or set-top boxes, blowing heat for a few minutes, and improving the performance of TV boxes and set-top boxes. You can also go to a treasure to buy a USB for $10. Small fan, the effect is not bad.
In the end, you can use a stainless steel box to dissipate heat. For example, the boxes that we normally use to eat snacks can be placed on the top and bottom of the TV box to dissipate heat.
The above is only a simple TV box and set-top box cooling tips, we only guarantee good cooling effect, in order to extend the life of TV boxes or set-top boxes.
Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.
Medical Cable Assembly refers to the customized wiring harness applied to various medical equipment. The quality of medical cable assembly can be said to be the highest in the industry, because modern medical safety factor requirements are gradually increasing, and every component involved in medical equipment must undergo strict testing processes. In order to ensure the quality of medical cable assembly. To meet the standards, strict attention must be paid to the production and processing stage of medical Wire Harness .
1. Opening process of medical cable assembly: The accuracy of the opening process is directly related to the entire production schedule. Once errors occur, especially if the opening size is too short, it will lead to rework of all stations, which will take time and effort and affect production efficiency.
2. The crimping process of the medical cable assembly: Determine the crimping parameters according to the terminal type required by the drawing, and make the crimping operation manual. For those with special requirements, it is necessary to indicate on the process document and train the operator.
3. Pre-installation process of medical cable assembly: First, the pre-installation process operation manual must be compiled. In order to improve the efficiency of final assembly, a pre-installation station must be set for complex medical wiring harnesses. If the pre-assembled part is assembled too little or the wire path of the assembly is unreasonable, it will increase the workload of the general assembly personnel.
4. The final assembly process of the medical cable assembly: According to the assembly table designed by the product development department, design the tooling equipment, the specifications and dimensions of the material box, and paste the numbers of all assembly sheaths and accessories on the material box to improve the assembly efficiency.
In addition to Custom Medical Cable, we also produce Vehicle Cable Assembly and Industrial Cable Assembly. Our Medical Power Wire Harness is exported overseas.
We welcome you to contact our sales or engineering team to discuss the special needs of your application.
Medical Cable Assembly,Custom Medical Cable,Microwave Cable Assemblies,Custom Medical Cable For Sale
Kable-X Technology (Suzhou) Co., Ltd , https://www.kable-x-tech.com