With the continuous evolution and update of drone technology , the cameras equipped with drones are becoming more sophisticated and advanced. They also have many parameters like traditional cameras, such as white balance, exposure compensation, etc. For aerial photography novices, how to adjust the parameters according to different environments is a "difficult" problem for the most beautiful scenery. Aerial photographer Jerome Courtial shares some of the parameters he is used to. If you have a DJI drone, you can refer to his instructions and set up to learn the best time to capture.
Before starting the setup, Jerome Courtial still reminds everyone, remember to shoot in RAW format, he said that he has seen too many newbies, the drone does not make any parameter adjustments after getting the hand, and the default parameters of the DJI drone are Photographing in JPG format.
In addition, he also stressed that on the ground traditional photography, a battery can support for several hours, you have several hours to adjust the parameters, and the aerial drone has only 20 minutes of battery life, so the parameters are timely and accurate. Adjustments are especially important.
Shooting during the day
If shooting during normal daylight hours, I will always turn on AEB (Bracketing) to shoot. In this mode, the camera will shoot the same scene with 3 or 5 different exposure parameters. It is guaranteed that the brightest and darkest parts of the picture are recorded, and when they are superimposed at the later stage, the original picture dynamic range can be retained as much as possible.
AEB mode
When shooting in AEB mode, if there is a very dark or bright part in the overall picture, we can make the bracketing auto exposure start from -1 or +1 according to the actual situation. In the white balance part, most of the time I think that "automatic" can be used. Moreover, if the camera itself is not sure, if it is shot in RAW format, it can be easily adjusted in the later stage.
Filter
When you fly to the surface to shoot a waterfall, there is often an overexposure. For a model with a fixed aperture of 2.8 such as the Phantom 4, even if the shutter reaches the highest value, it will not help, and it is difficult to surround the exposure. To ensure that the picture is not exposed, we must use the filter to reduce the overall amount of light. And if you want to take a turbulent effect, you should match the height of the ND filter to ensure normal exposure during long exposures. Let's take a look at the focus of our dry goods school in this section, how to shoot the most beautiful sunrise or sunset photos in the "golden moments" such as sunrise and sunset!
Low light environment such as the sunset
If you are also the owner of the aerial drone of DJI in DJI, you will find that if the environment is dark when shooting in AEB mode, the camera will not reduce the shutter speed when the shutter speed reaches 1/100 or 1/60. Instead, it moves to improve the ISO, which in turn causes a lot of noise in the picture. Therefore, you need to make a judgment based on the actual situation. If the wind in the environment is large at the time, if the shutter speed continues to decrease, it will cause the drone to be cheap during shooting, which will affect the photo overlay at the later stage. Then we can only use ISO. Continue to improve.
Before starting the setup, Jerome Courtial still reminds everyone, remember to shoot in RAW format, he said that he has seen too many newbies, the drone does not make any parameter adjustments after getting the hand, and the default parameters of the DJI drone are Photographing in JPG format.
In addition, he also stressed that on the ground traditional photography, a battery can support for several hours, you have several hours to adjust the parameters, and the aerial drone has only 20 minutes of battery life, so the parameters are timely and accurate. Adjustments are especially important.
Shooting during the day
If shooting during normal daylight hours, I will always turn on AEB (Bracketing) to shoot. In this mode, the camera will shoot the same scene with 3 or 5 different exposure parameters. It is guaranteed that the brightest and darkest parts of the picture are recorded, and when they are superimposed at the later stage, the original picture dynamic range can be retained as much as possible.
AEB mode
When shooting in AEB mode, if there is a very dark or bright part in the overall picture, we can make the bracketing auto exposure start from -1 or +1 according to the actual situation. In the white balance part, most of the time I think that "automatic" can be used. Moreover, if the camera itself is not sure, if it is shot in RAW format, it can be easily adjusted in the later stage.
Filter
When you fly to the surface to shoot a waterfall, there is often an overexposure. For a model with a fixed aperture of 2.8 such as the Phantom 4, even if the shutter reaches the highest value, it will not help, and it is difficult to surround the exposure. To ensure that the picture is not exposed, we must use the filter to reduce the overall amount of light. And if you want to take a turbulent effect, you should match the height of the ND filter to ensure normal exposure during long exposures. Let's take a look at the focus of our dry goods school in this section, how to shoot the most beautiful sunrise or sunset photos in the "golden moments" such as sunrise and sunset!
Low light environment such as the sunset
If you are also the owner of the aerial drone of DJI in DJI, you will find that if the environment is dark when shooting in AEB mode, the camera will not reduce the shutter speed when the shutter speed reaches 1/100 or 1/60. Instead, it moves to improve the ISO, which in turn causes a lot of noise in the picture. Therefore, you need to make a judgment based on the actual situation. If the wind in the environment is large at the time, if the shutter speed continues to decrease, it will cause the drone to be cheap during shooting, which will affect the photo overlay at the later stage. Then we can only use ISO. Continue to improve.
North America is expected to account for the largest market size during the forecast period.
The market is segmented by region into North America, South America, Europe, Asia Pacific, and Middle East & Africa. Of these, North America is the largest portable power station market in the world, predominantly due to the US, and the trend is expected to be the same during the forecast period. The market in the region is driven by the growing emphasis on camping and outdoor recreational activities, and the increasing use of smart electronic devices, and the subsequent need for connectivity, which requires power.
This research report categorizes the portable power station market by power source, by technology type, by capacity, by application, by sales channel, and by region.
By Power Source
- Hybrid Power
- Direct Power
By Technology Type
- Lithium-ion
- Sealed Lead-Acid
By Capacity
- 0−100 Wh
- 100−200 Wh
- 200−400 Wh
- 400−1,000 Wh
- 1,000−1,500 Wh
- 1,500 Wh and above
By Application
- Emergency Power (Residential & Commercial end user)
- Off-grid Power
- Automotive
By Sales Channel
- Online Sales
- Direct Sales
By Region
- North America
- South America
- Europe
- Asia Pacific
- Middle East & Africa
Solar Power Battery Storage,Solar Energy Battery,Best Battery Storage,Solar Battery Storage Cost
Shenzhen Sunbeam New Energy Co., Ltd , https://www.sunbeambattery.com