July high temperature holiday, some people chose to go with the boss to put chicken island, I was with a group of family homes choose to take the money to go home summer.
After feeling a few cool boxes, I felt a heavy atmosphere. Although the chassis is good, there is less of a climax. Hey, don't think about it.
Then I went shopping everyday. My boss is from Guangzhou, our company is from Guangzhou, and I am from Guangzhou. My dad and my mother are from Guangzhou. Our ancestors did not know, did not ask, and did not have the opportunity to ask.
With XX feelings for Guangzhou, I clicked on the purchase immediately below the merchandise column of this brand.
Tower Shield No.11.
Yes, I want to play a special different case. Inquiries, this tower shield NO.11 chassis, "crash" situation is more serious. As long as you use QQ to cut a map, you can find it in the search, the chassis actually appeared several brands.
Then I chose Tower Shield because his family is in Guangzhou.
Long-lost local style, three-dimensional size on the package at a glance. There is a kind of doubt in the first love and embarrassed opening and long in the heart, tower shield this refreshing style, I really like it.
At the first glance of the chassis, the plastic bag was a bit exaggerated. From afar, it seems that it was a spider web that had been dusty for a long time.
This is much more comfortable. It is more beautiful to tear off the extra coat.
The side plate of Tower Shield NO.11 is not really fresh, but is a simplified version of a special glass side plate. Their fixing methods are very different from the traditional side boards.
Wait a minute, it feels like it is now sideways through the chassis. No longer like before, after opening the side panels, there is a sense of openness.
This is another brand LOGO that is hatched in Guangzhou.
I observed this case and the styling was filled with an outstanding strong vision. Ordinarily it is personality, and fashion is samate.
The Eiffel Tower has just been designed and is also known as a wonderful flower. Now it has become a famous building. Many new things often cannot be accepted at the first time. These unrecognized epochal arts have been hit, and more creative fetuses are dead in the designer's mind.
For these advanced things, we should look at it with an eye for viewing. Maybe he will change the world.
Faced with the chassis, the structure is still a standard ATX, and a total of seven 12cm RGB fans are also available.
The four corners of the chassis are rounded, and two black steel bars cover the chassis half a turn. I think these two steel bars are portable.
The rear comes with a 12cm RGB fan, the label is the Tower Shield's LOGO, no label parameters, guess should be 1200 ~ 1800 rpm. However, in order to unify the vision, this fan window changed the holes used for general ventilation into personalized side bars like the front ones, and only revealed a large area of ​​hollows in the middle.
This is contrary to the characteristics of the typhoon eye of the fan, and it is not easy to realize the performance of the fan.
It's not easy to see a one-time PCI flap. I'm still looking for some PCI files.
This external PCI fixing method is well-received, but in fact, it is also the same, because there are enough cutouts on both sides of the side panel. It seems a little repetitive and redundant.
Like many chassis, the interior is divided into two layers that can hide the line while isolating the power supply. There is a white RGB LED strip in the middle. Like the fan, seven different colors can be switched on when the light is on. This is a great highlight of Tower Shield NO.11.
Fans close-up, these two fans can speed up the air flow inside the chassis, the same with the top fan, the power is also good. The problem is like the rear fan, the ventilation area is a bit worried.
Fortunately, the front three 12cm RGB fans looked good.
Looking back, I bought a lot of chassis without a few fans, and this chassis comes with seven, how is stronger than not.
Looked very good in front, mainly three big fans have already caught enough attention.
The magnetic dust filter is easy to remove and easy to clean.
There are three such magnetic dust filters, one on the top and one on the bottom. Good quality, obviously industrial grade.
1942fb5b5275383a9e47ab3c1fbe4.jpg" />
The top is a bit lacking, a little less than the standard 240. Fortunately, the front can be put in a cold row.
The front I/O wiring is also good, if there is a lid to hide it would be better. 
Front fan position is better if 240 can be installed.
The last magnetic air filter is at the bottom, and a fan can be installed under the bottom power supply to further help the power dissipation.
In this way, the power supply will have 3 additional fans facing each other. This will be very cool.
There is a gap at the bottom of the hard disk, which is what...
It may be that the self-contained stuff has already filled the chassis, and the screws are smaller.
The Tower Shield has three HDD hard disk cages that are more than enough for daily use. 
HDD hard disk shelves are much more scientifically installed than they are now. It is not necessary to deform the shelf when installing the hard disk.
In addition to the HDD hard disk, there are four screw holes in the middle that allow you to install an SSD solid state drive.
The biggest short board in this chassis is the back line, although the fan line is all tied to the back of the factory. However, it is still a bit messy.
Looking at this pile of lines, I'm already numb. These lines should be combed along the edge of the chassis.
Installation effect
It was a bit unaccustomed to look at the chassis at first, but it was instantly conquered after the machine was on.
So I decided to give him a background.
Tower shield NO.11 is obviously an e-sports gaming chassis that focuses on dazzling effects. It comes with seven 12cm RGB fans, so there is no problem with heat dissipation.
The naughty SSD was intentionally installed like this, otherwise it would be blocked by the video card. DUKE, yes, this is the new series of dry ducks of MSI, Dark Dragon.
I/O is a bit quirky, a little creative, and a little admirable.
First, he is equipped with two Power power buttons. The only thing I think of is that when one is broken, the other can continue to serve the game. After all, the Power button is the most frequently used one. Don't call me wrong, after all, I guess.
The first two, his USB2.0 interface is very naughty, a bit like the feeling of Type-C. When connecting to the USB, you do not need to distinguish between the front and back, and the interface is plugged in. For the first time, I saw this kind of USB interface. Guangzhou's creative idea praised one. It is not Guangzhou that invented.
The unsigned button in the middle of the two Power buttons controls RGB switching. There are seven colors, but also gradually flashing.
Put a picture of some other angle, though not very good. Because of the small size of the place, some unified old altars that had not been dealt with a few days ago must not appear in the frame.
The red color is very good, that is, the radiator does not keep up with the rhythm.
By the way, Tower Shield NO.11 nominally supports a radiator height of 170mm. However, this cool 3DVC has reached 171.2mm. I can still cover the side panel.
Since the front power is shielded, give the power a close-up at the back.
It can be seen that there is still a lot of space under the power supply, and a fan can be added. However, this power supply itself is not hot and it is not added.
Power close-up, rated 600 watts with GTX1070 is enough.
The first time I was playing such an indecent chassis, I was just beginning to have fun, I thought I would definitely not use it.
Before installing the machine, I was only interested in his own RGB fan, a bit with a deterrent look at the design of the avant-garde. As mentioned earlier, then I found that I was wrong.
After the machine was turned on, the strong light of the lights came and the shield NO.11 was not designed for the theme of the main game atmosphere. For Guangzhou's new brand, perhaps this is not a good chassis product, but he gave me a vision far better than all the products I used.
Even the well-known overseas thieves and cool mothers are not 100% perfect products. For the Tower Shield NO.11 chassis, I would like to say that the advanced design style has taken the absolute advantage. If you are full of creative development and pay attention to some small details, it's even better. For example, the installation of the power supply position, the handling of the back line, and the operating space of the chassis connection are somewhat small.