Model NO.: BSMJ
Usage: Low Frequency Bypass
Filter: Composite Paper Capacitor
Power Capacitor Function: Reduce Reactive
Trademark: HOMOR
Transport Package: Standard Export Carton
Specification: Self Healing Low Voltage
Origin: Zhejiang
HS Code: 85321000
Model NO.: BSMJ
Usage: Low Frequency Bypass
Filter: Composite Paper Capacitor
Power Capacitor Function: Reduce Reactive
Trademark: HOMOR
Transport Package: Standard Export Carton
Specification: Self Healing Low Voltage
Origin: Zhejiang
HS Code: 85321000
General Decription:Our self-healing type low voltage shunt capacitor, applied the advanced Zn-Al complexes metallized film, adopted foreign advanced production technology techniques and international IEC60831-1(1996) standards. The products is mainly suitable for low voltage electric network to improve power factor, reduce reactive loss and improve the voltage quality.
Featurns:
1- Small volume, light weight: it is only 1/4 and 1-5 of the weight and volume of the outdated products respectively
2-Â Low loss: with the actual lossless than 0.1, little radiation, low temperature rise and good energy conservation effect
3-Â Excellent self-healing performance: when a part of the isolation is fed through due to the over voltage, it is capable of self-healing so as to continue the operation, the reliability is improved greatly
4-Â Safety: Equipped with self-discharging resistant and safety devices inside, the inner discharging resistant can make the attached electric discharged; when there is wrong with the capacitor, the fuse equipment can cut out the electric power so that no more trouble with the capacitor, safety and reliable.
5-Â Without oil leakage: this product adopted advanced half-solid soak material drop melting point higher than 70 degree, avoid leakage during operation and protect the envirament the capacitor will not no use since the leakage.
Technical Parameter:
| Rated voltage | 250-690VAC |
| Rated capacitance | 1-100KVAR |
| capacitance tolerance | -5 - +10% |
| Tangent of the los angle | ≤0.15% |
| With stand voltage of case between phase | 2.15Un.2s |
| With stand voltage of case between phase | 3KV(AC)10s&3.6KV(AC)2s |
| Insulation | 500VDC among the phases 1 min more than 100mΩ |
| Max allowable voltage | Rated voltage 110% |
| Max allowable current | Rated voltage 130% |
| Self-dischargeing characteristic | switch off the power supply for 3 min, the residual voltage less than 50V |
Model and dimension:
 General Decription:
Our self-healing type low voltage shunt capacitor, applied the advanced Zn-Al complexes metallized film, adopted foreign advanced production technology techniques and international IEC60831-1(1996) standards. The products is mainly suitable for low voltage electric network to improve power factor, reduce reactive loss and improve the voltage quality.
Featurns:
1- Small volume, light weight: it is only 1/4 and 1-5 of the weight and volume of the outdated products respectively
2-Â Low loss: with the actual lossless than 0.1, little radiation, low temperature rise and good energy conservation effect
3-Â Excellent self-healing performance: when a part of the isolation is fed through due to the over voltage, it is capable of self-healing so as to continue the operation, the reliability is improved greatly
4-Â Safety: Equipped with self-discharging resistant and safety devices inside, the inner discharging resistant can make the attached electric discharged; when there is wrong with the capacitor, the fuse equipment can cut out the electric power so that no more trouble with the capacitor, safety and reliable.
5-Â Without oil leakage: this product adopted advanced half-solid soak material drop melting point higher than 70 degree, avoid leakage during operation and protect the envirament the capacitor will not no use since the leakage.
Technical Parameter:
| Rated voltage | 250-690VAC |
| Rated capacitance | 1-100KVAR |
| capacitance tolerance | -5 - +10% |
| Tangent of the los angle | ≤0.15% |
| With stand voltage of case between phase | 2.15Un.2s |
| With stand voltage of case between phase | 3KV(AC)10s&3.6KV(AC)2s |
| Insulation | 500VDC among the phases 1 min more than 100mΩ |
| Max allowable voltage | Rated voltage 110% |
| Max allowable current | Rated voltage 130% |
| Self-dischargeing characteristic | switch off the power supply for 3 min, the residual voltage less than 50V |
Model and dimension:
Â
PCB & PCB Assembly,Circuit Board ,Printed Circuit Board ,PCB Design
LED light Co., Ltd. , http://www.nbpcbassembly.com