The "Entry Conditions" make a series of regulations from the establishment and layout of the project, production scale technology and equipment, energy consumption, and environmental protection. The "Entry Conditions" will be implemented from July 26th. According to this new regulation, about 20% of production capacity will be eliminated.
According to Jia Yinsong, director of the Rare Earth Office of the Ministry of Industry and Information Technology, the “Entry Conditions†set up a rare earth entry threshold for the first time in terms of the scale of rare earth production, which fundamentally reflects the improvement of internal industrial technology and equipment. Jia Yinsong said that improving the access threshold for rare earth enterprises is not only to avoid vicious competition in the industry, but more importantly to improve the overall production and operation quality of China's rare earth industry. He expects that nearly 20% of the country's production capacity will be eliminated after the entry barrier is raised.
According to the “Admission Conditionsâ€, the production scale of mixed rare earth mining enterprises should be no less than 20,000 tons/year (based on oxides, the same below); the production scale of fluorocarbon strontium mining enterprises should be no less than 5,000 tons/year; The production scale of rare earth mining enterprises should be no less than 500 tons/year. The mining of a single monazite mine is prohibited.
In addition, the production scale of independent smelting and separating enterprises using mixed rare earth ore should be no less than 8,000 tons/year; the production scale of independent smelting and separating enterprises using fluorocarbon antimony ore should be no less than 5,000 tons/year; using ionic rare earth ore The production scale of independent smelting and separating enterprises should be no less than 3,000 tons/year. The production scale of rare earth metal smelting enterprises should be no less than 2,000 tons/year (physical quantity). At the same time, the minimum capital ratio of the above various types of fixed asset investment projects shall not be less than 20%.
In terms of comprehensive utilization of resources, the “Entry Conditions†require that the mining loss rate and depletion rate of mixed rare earth ore and fluorocarbon antimony ore should not exceed 10%, and the ore recovery rate of general ore should reach 72% or more, low grade and difficult to choose. The recovery rate of smelting rare earth ore is more than 60%, and the recycling rate of production water is over 85%. The comprehensive recovery rate of ionic rare earth ore mining is over 75%, and the recycling rate of production water is over 90%.
In terms of environmental protection, the "Entry Conditions" stipulates that all environmental protection measures must be strictly implemented, and new (reform and expansion) projects are strictly implemented for the environmental impact assessment of construction projects, "three simultaneous", environmental protection facilities completion acceptance system, and production projects have not been implemented. The acceptance of the environmental protection department shall not be put into production. At the same time, the pollutant discharge meets the total control index, and the pollutant emission reduction task must be completed.
Jia Yinsong also said that in the future, the combination of backward elimination, technological transformation, mergers and acquisitions will be combined, and necessary compensation can be taken for compliance with regulations, and those that do not meet the regulations and violate some regulations must be unswervingly eliminated and treated differently.
The "Entry Conditions" clarify that new, rebuilt and expanded rare earth mine development, smelting separation and metal smelting projects must meet the access conditions.
Innosilicon is a worldwide one-stop provider of high-speed mixed signal IPs and ASIC customization with leading market shares in Asian-Pacific market for 10 consecutive years. Its IP has enabled billions of SoC's to enter mass production, covering nodes from 180nm to 5nm across the world`s foundries including: GlobalFoundries, TSMC, Samsung, SMIC, UMC and others. Backed by its 14 years of technical expertise in developing cutting-edge IPs and ASIC products, Innosilicon has assisted our valued partners including AMD, Microchip and Microsoft to name but a few, in realizing their product goals.
Innosilicon team is fully devoted to providing the world's most advanced IP and ASIC technologies, and has achieved stellar results. In 2018, Innosilicon was the first in the world to reach mass production of the performance-leading GDDR6 interface in our cryptographic GPU product. In 2019, Innosilicon announced the availability of the HDMI v2.1 IP supporting 4K/8K displays as well as our 32Gbps SerDes PHY. In 2020, we launched the INNOLINK Chiplet which allows massive amounts of low-latency data to pass seamlessly between smaller chips as if they were all on the same bus. With a wide range of performance leading IP in multiple FinFET processes and 22nm planar processes all entering mass production, Innosilicon's remarkable innovation capabilities have been proven in fields such as: high-performance computing, high-bandwidth memory, encrypted computing, AI cloud computing, and low-power IoT.
Innosilicon Mining Machine:Innosilicon T2 Turbo 25T,Innosilicon T3+ 52T,Innosilicon T3 43T,Innosilicon T2 Terminator,Innosilicon T3 39T,Innosilicon T2 Turbo+ 32T
Innosilicon Mining Machine,T3 Pro Miner,T3 Pro Innosilicon,T3 Pro 67T Innosilicon
Shenzhen YLHM Technology Co., Ltd. , https://www.nbapgelectrical.com