From 2008 to 2012, with the implementation of home appliances to the countryside and other policies, the production and sales volume of refrigerators, washing machines, color TV products have achieved a leap-type growth, and the product structure has also been optimized and upgraded. Although home appliances to the countryside have ended, air-conditioning products in the 3rd and 4th grade and rural markets are far from saturated. With the acceleration of the urbanization process, the air-conditioning industry is expected to bring about the fourth wave of home appliance consumption in the rural market. Inverter air conditioner attention increased
After the home appliances went to the countryside and energy subsidies, the industry had commented that the consumer demand in the 3rd and 4th markets and the rural market was seriously overdrawn, but Chen Xiao, Chairman of the Board of Directors and Strategic Planning Department of MultiFamily Chains pointed out that the first quarter of 2013 Since then, traditional home appliance channel distributors are still optimistic about the expectation of the tertiary market and the rural market. “Currently, the market's spending power in these areas is underestimated.†He pointed out that since the beginning of the year, sales of air-conditioning products in the above market have recovered.
The space for the development of the air-conditioning industry is reflected in two aspects: the low-end basic consumption is still growing, and the middle-to-high-end consumer trends have already emerged.
High-quality and low-cost air-conditioning products are the mainstream of the rural consumer market. This part of the product still has a large space for development. According to statistics from the National Bureau of Statistics, in 2011, the number of air conditioners per 100 households in rural households in China was only 23, while the number of urban households in the same period reached 122, while that of rural household refrigerators, washing machines, and color TVs was 116, respectively. 62 and 63. In 2012, it was the winter period of China's air-conditioning industry. The relevant data of the air-conditioning industry will not change much. Compared with horizontal and vertical, the number of households with air-conditioning rural households is still at a relatively low level.
In addition, the attention of rural residents to energy-saving, frequency conversion and other high-priced air-conditioning products is also rising. Chen Xiao said: "The consumption capacity of rural residents has increased significantly. After entering 2013, the demand for color TVs and air conditioners in the rural market has picked up. The TV market reflects the demand for large-size TVs, and the air-conditioning market is reflected in consumption. More attention is paid to the higher-priced inverter products."
E-commerce channels sink to broaden air-conditioning sales channels
Optimistic expectations not only come from traditional channel providers, but e-commerce providers such as JD.com, Tmall.com, and Suning.com also place high hopes on the 3rd and 4th markets, while regional distributors including Dafangda.com and Huiyin.com begin to vigorously improve townships this year. , Community online sales chain.
Analysts in the home appliance industry said that the tertiary market and the rural market will become the "battleground for the air-conditioning industry."
In terms of channel providers, JD.com piloted O2O models in multiple locations this year, laid out three or four levels of markets, and set annual sales targets for air-conditioning sales of 2.6 billion yuan; at the end of May, Tmall once again launched a three-to four-tier market logistics and distribution system. In cooperation with China Post, the two companies jointly started the cash on delivery service covering 2000 counties and cities nationwide. In addition, Suning Tesco and Gome Online will also deepen the layout of the 3rd and 4th markets as their future development goals.
In terms of brands, Gree, TCL, Haier and other companies started a further “channel sinking†layout this year to increase their competitiveness. It is understood that in recent years, TCL air conditioner has been committed to the development of three or four markets, the number of TCL stores is also growing. According to the relevant person in charge of TCL, in 2013, TCL will at least open another 3,000 franchised stores, and will adopt a marketing model in which cities will promote rural and rural countermeasures to penetrate cities, in order to further increase the market share of TCL's air conditioners.
An analyst in the home appliance industry said that in the case of serious overdrafts in the primary and secondary markets, the tertiary and rural markets have become another battlefield for air-conditioning companies, but to seize market share, it is still necessary to further increase product coverage. At present, the depth of e-commerce, traditional channel providers, and brand “channel sinking†is not enough. In the future, it will be best to extend the main service network to the township and community level in order to gain greater market share.
Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Installing the batteries
Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutcs (2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will rc-caculatc. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:0() again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII without other figures. LCD on third line displays''DAY''- "1 "will be showed on numerical part(thc other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untial the maximal cumulative time of 9999 days.
Mode 3: Time/Voltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.
LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 1 .OOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second line displays the miniinum power which ranges in 0.0W~9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line
displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without
other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line
displays the"O VER LOAD" with booming noise to warn the users,( 1918935, 60470643,
60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third
line described in this intruction take section according to two black
lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight
start light again. (Backlight only light when it connect to AC
power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting
more than 3 seconds(LCD on third line display system defaults price, eg
O.OOCOST/KWH ),the rendered content begins moving up and down which
means that the device has entered the setting mode. Then press FUNCTION
button to change selection and press UP/DOWN to set what you want. (On
pressing once, the figure after domical point will increase or decrease
accordingly. On pressing and hold-on, figures after demical point will
increase or decrease slowly in 2 seconds while figures change quickly
when hold-on time exceeds 2 seconds. When hold-on time reaches 10
seconds or more, the figures after demical point will stop while the
figures before demical point begin to increasing or decreasing.) After
that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again
to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After
setting all above, press COST to return to Mode7 or it will
automatically return to Mode7 without any pressing after setting with data storage.
Power Meter Double Rates, Power Meter Two Rates, Cost Rate Socket, Power Meter Cost Rate, Energy Meter Cost Rate, Cost Socket, Cost Plug
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com