Specifications
1.Aluminum alloy switch on For Shock Flashlight
2.American  led chip with 200 lumens light output
3. Skid-proof design & water-resistant design.Â
4.Adjustment the distance and brightness
Â| Â Light Source | Â 3W American XPE |
| Â Product Size | Â 1.33 * 6.49 in |
| Â Light Output | Â 200 Lumens |
| Â Irradiation Range | Â 200 Meters |
| Â Product Weight | Â 0.3Â lb(without battery) |
| Â Battery Type | Â 18650 Li-ion Rechargeable Battery or AAA Dry Battery |
|
 Charging Time  (approximately) |
 3 hours for powerful flashlight |
|
 Operating Time  (approximately) |
 3 hours at full Brightness  6 hours at medium Brightness  6 hours at strobe Brightness |
| Â Color | Â Customized Design for Wholesale Led Flashlight |
|  Packaging |  Customized Design (such as  Display Pack, Blister pack, Gift Box, White Box or Color Box) |
Â
Specifications
1.Aluminum alloy switch on For Shock Flashlight
2.American  led chip with 200 lumens light output
3. Skid-proof design & water-resistant design.Â
4.Adjustment the distance and brightness
Â| Â Light Source | Â 3W American XPE |
| Â Product Size | Â 1.33 * 6.49 in |
| Â Light Output | Â 200 Lumens |
| Â Irradiation Range | Â 200 Meters |
| Â Product Weight | Â 0.3Â lb(without battery) |
| Â Battery Type | Â 18650 Li-ion Rechargeable Battery or AAA Dry Battery |
|
 Charging Time  (approximately) |
 3 hours for powerful flashlight |
|
 Operating Time  (approximately) |
 3 hours at full Brightness  6 hours at medium Brightness  6 hours at strobe Brightness |
| Â Color | Â Customized Design for Wholesale Led Flashlight |
|  Packaging |  Customized Design (such as  Display Pack, Blister pack, Gift Box, White Box or Color Box) |
Â
D-sub Connector Contacts
A D-sub connector is a form of connector commonly found in electronic and computer systems. It consists of a D shaped metal band and two or more parallel rows of either pin contacts (male) or socket contacts (female). D-sub connector contacts can vary in size, material, current rating, length and resistance.
The most common type of connector is the crimp contact. These are assembled by inserting a stripped wire end into the cavity at the rear of the contact. The cavity is then crushed using a crimp tool, gripping the contact to the wire.
What are D-sub connector contacts used for?
The D-sub connector contacts carry the signal from the source to the destination across the D–sub connection.
Types of D-sub connector contacts
Most D-sub connectors are supplied with contacts ready in place. Contacts can be replaced if damaged or if the application of the D-sub connector is to be changed from the original design specification.
High-current, high-voltage, or co-axial inserts require larger contacts. The material of the D-sub connector contact can be changed if the robustness or quality of the connection needs to be improved.
D-SUB coaxial contact,D-Sub Connectors Contacts,D-Sub Plug Connectors Contact,D-Sub Receptacle Connectors Contact
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com