Heat and high temperature wire and cable are generally determined by two requirements

Heat and high temperature wire and cable are generally determined by two requirements. The first is that the environment temperature of the wire and cable is relatively high, and the cable can normally transmit signals or electric energy at a high temperature for a long period of time; the other is the power transmission cable, and the main purpose is to increase the interception capacity.

Cables that work in high temperature environments. Ordinary cables are prone to insulation aging and scorching at high temperatures, and the use of cables can result in loss of performance and destruction. The high-temperature cable can work normally and stably under the rated high temperature, and the signal or power transmission performance is not affected, and the cable has a long service life. This kind of functional cable is the most common type of high-temperature cable, and its use characteristics are also the most understandable.

The load-carrying high-temperature cable is mainly used to reduce the outer diameter and weight of the cable under the premise of current-carrying, and it has been developed to be lightweight. In general, the higher the operating temperature of the cable, the greater the ampacity of the same cross-section cable. In areas such as aircrafts and automobiles, the significance of weight reduction is considerable, and the use of high-temperature cables greatly reduces the cross section. When the operating temperature is increased from 90°C to 155°C, the current carrying capacity increases by 50%. At the same current carrying capacity, the cable weight is reduced by half and the cost is also reduced. Of course, at the same time as high cutoff, most of the insulation material will also have an increase in power consumption.