NXP Semiconductors pilots green innovation and technology at the 2011 IIC Spring Show

Shanghai, China, February 24, 2011 - NXP Semiconductors NV (NASDAQ: NXPI) was held at the China International IC Symposium & Exhibition (IIC China) Spring Show in Shenzhen from February 24th to 26th Among them, the company exhibited its innovative green semiconductor solutions based on high performance mixed signal (HPMS) and a wide range of applications. NXP Semiconductors has participated in the IIC China exhibition for many years, fully demonstrating its important role in the innovation and R&D and green technology development of China's semiconductor industry, and further demonstrates the company's continued emphasis on the Greater China market and strong local support.

With the evolution of time and ideas, the demand for the semiconductor market has gradually turned into a pursuit of "greener, healthier, smarter." NXP, a leader in the semiconductor industry, is committed to a sustainable business philosophy with environmental protection, energy conservation and clean technology as the backbone of R&D and innovation. Based on its leadership in green semiconductor products and eco-engineering, NXP has introduced a green, innovative solution that is both high-performance and low-power. This year, NXP will present at the IIC Spring Show, exhibiting a full range of eco-engineered green innovation solutions (Booth #2E01) covering RF, power management, lighting, microcontrollers, interfaces, automotive electronics and more.

GreenChip brings new experiences in power management and energy-efficient lighting

NXP is a global leader in power supply energy-saving solutions. The GreenChip series is highly qualified, low-cost, and small in size. By the end of 2010, global shipments have exceeded 500 million. The power control solution exhibited at this exhibition is suitable for switching power supply control of different powers such as LCD/LED TV, computer integrated machine, high efficiency adapter, etc.

This time, NXP will also showcase a new generation of lighting driver chips that can flexibly meet any power, dimming or non-dimming design requirements, resulting in a high quality CFL and LED lighting experience. The CFL solution dramatically reduces start-up time, efficient deep dimming, and extended lamp life; LED solutions offer the advantages of slim size, power savings, and color brightness control. NXP's industry-leading integrated lighting chip solutions not only meet the stringent laws and regulations of environmental and energy conservation in various countries, but also bring a revolutionary lighting experience to consumers.

For more details on NXP's participation in the 2011 IIC China Spring Show, please visit: http://

About NXP Semiconductors

NXP Semiconductors NV (Nasdaq: NXPI) offers high performance mixed signal and standard product solutions with its leading RF, analog, power management, interface, security and digital processing expertise. These innovative products and solutions are used in a wide range of applications in automotive, smart identification, wireless infrastructure, lighting, industrial, mobile, consumer and computing. The company has business executives in more than 25 countries around the world. In 2010, the company's turnover reached $4.4 billion. For details, please visit the company's official website for more information.

Dabcool Vaporizers

Features:

1. On/Off:Press For 3seconds

2. 4 Unique Manual Heat Settings(450ºF/500ºF/550ºF/600ºF)

3. 20 Second Average Heat-Up Time

4.Micro-USB Fast Charging, Full Charge Time:About 2 Hours

5.Atomizer For Puff peak

6.The Device Has Low Voltage Protection, Short Circuit Protection And Overheating

Protection.

7.1500mah built in lipo battery

Packing:

A: Alcohol Pad

B: Micro-USB SuperCharger

C: Loading Tool

D: Glass Attachment

E: Atomizer

F: Base

G: Silicone Box

H: Carb Cap

I : Extra Bowl*2

How to use:

STEP 1: Fully charge device before first use. White lights pulse while charging, and turn

off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ;

4 lights: 75-100%)

STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base.

X- Do not allow water in lower section!

STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass

into the base.

STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device).

The white lights will flash once and the ambient lights will flash sequentially red>blue>

green.

STEP 5: Single click to toggle through heat settings.

1 white light: 450ºF 2 white lights: 500ºF

3 white lights: 550ºF 4 white lights: 600ºF

Device will vibrate once while changing heat.

STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].

STEP 7: Place carb cap on top of atomizer.

STEP 8: Double click to initiate heat-

up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click

the button to turn off the heat-up process at anytime.

STEP 9: Ambient lights will turn green when ready. ( green lights will be on for 20

seconds, then heat up process automatically stop and ambient lights turn blue)

STEP 10: Use a cotton swab to clean the chamber after each use.

Q1. How about the MOQ?

Q2. Can I ask samples for testing before placing an order?
A. Yes we can send you some samples as your quality check, customer need to pay sample charge and shipping cost.
Q3. Can I make our logo on your vape product?
A. Yes, we accept OEM service.Please send us your logo design.
Q4. What is your terms of payment, how can we pay you?

A: Our company can accept both T/T, Paypal payment or others. If you have any other payment requirements, please leave message or contact our online salesman directly.

Factory Price E-Cigarette 1500mAh Battery Vaporizer Modhookah Wax Concentrate Shatter Budder DAB Rig Vape Electronic Vapor Cigarettes

Yiwu YiTong Trading company , https://www.nx-vapes.com