D002 FTTX FTTH Fiber Optic Dome Splice Closure Cable Joint Enclosure
1. Scope of application
This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
Â
The scope of application is: aerial, underground, pipeline, hand-holes. The ambient temperature ranges from -40ºC to 65ºC.
Â
2. Basic structure and configuration
2.1 Dimension and capacity
| Outside dimension (Height x Diameter) | 430mm×190mm |
| Weight (excluding outside box) | 2500g-3100g |
| Number of inlet/outlet ports | 4 pieces |
| Diameter of fiber cable | Φ8mm~Φ16 mm |
| Capacity of FOSC | Bunchy: 12-96 (cores), Ribbon: up to 288 (cores) |
2.2 Main components
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 355mm x 150mm |
| 2 | Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) |
Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | Â |
| 4 | Base | 1set | Fixing internal and external structure | Â |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | Â |
| 6 | Seal fitting | 1 pc | Sealing between FOSC cover and base | Â |
| 7 | Seal rings for inlet/outlet ports | 4pcs | For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm | Â |
| 8 | Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 9 | Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
2.3 Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Â | Protecting fiber splices | Configuration as per capacity |
| 2 | Nylon tie | Â | Fixing fiber with protective coat | Configuration as per capacity |
| 3 | Earthing wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| 4 | Abrasive cloth | 1 piece | Scratching fiber cables | Â |
| 5 | Labeling paper | 1 piece | Labeling fibers | Â |
| 6 | Special wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | Â |
| 7 | Measuring paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| 8 | Seal tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| 9 | Insulation tape | 1 ring | Enlarging diameter of fiber cable for easy fixing |  |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | Â |
| 11 |
Buffer tube  |
decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| 12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | Â |
More photos of the splice closure:
Spring Optical Communication is one of the largest and best fosc fiber splice closure manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized fosc fiber splice closure in stock with our factory. Also, free sample is also available if necessary.
Many Thanks for checking our Fiber Splice Closure.  Kindly please click below "Send " button, will send our professional quotation including all information you may need immediately. You will be satisfied with our 24/7/365 online service definitely.Â
Appreciate for your trust and support :)Â
D002 FTTX FTTH Fiber Optic Dome Splice Closure Cable Joint Enclosure
1. Scope of application
This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
Â
The scope of application is: aerial, underground, pipeline, hand-holes. The ambient temperature ranges from -40ºC to 65ºC.
Â
2. Basic structure and configuration
2.1 Dimension and capacity
| Outside dimension (Height x Diameter) | 430mm×190mm |
| Weight (excluding outside box) | 2500g-3100g |
| Number of inlet/outlet ports | 4 pieces |
| Diameter of fiber cable | Φ8mm~Φ16 mm |
| Capacity of FOSC | Bunchy: 12-96 (cores), Ribbon: up to 288 (cores) |
2.2 Main components
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 355mm x 150mm |
| 2 | Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) |
Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | Â |
| 4 | Base | 1set | Fixing internal and external structure | Â |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | Â |
| 6 | Seal fitting | 1 pc | Sealing between FOSC cover and base | Â |
| 7 | Seal rings for inlet/outlet ports | 4pcs | For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm | Â |
| 8 | Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 9 | Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
2.3 Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Â | Protecting fiber splices | Configuration as per capacity |
| 2 | Nylon tie | Â | Fixing fiber with protective coat | Configuration as per capacity |
| 3 | Earthing wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| 4 | Abrasive cloth | 1 piece | Scratching fiber cables | Â |
| 5 | Labeling paper | 1 piece | Labeling fibers | Â |
| 6 | Special wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | Â |
| 7 | Measuring paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| 8 | Seal tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| 9 | Insulation tape | 1 ring | Enlarging diameter of fiber cable for easy fixing |  |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | Â |
| 11 |
Buffer tube  |
decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| 12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | Â |
More photos of the splice closure:
Spring Optical Communication is one of the largest and best fosc fiber splice closure manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized fosc fiber splice closure in stock with our factory. Also, free sample is also available if necessary.
Many Thanks for checking our Fiber Splice Closure.  Kindly please click below "Send " button, will send our professional quotation including all information you may need immediately. You will be satisfied with our 24/7/365 online service definitely.Â
Appreciate for your trust and support :)Â
Pcb Spring Terminal Blocks,Plug-In Terminal Block Connector,Pcb Plug-In 6Pin Terminal Block,Pcb 5.0Mm Wiring Type Terminal Block
Shenzhen Hongyian Electronics Co., Ltd. , https://www.hongyiancon.com