Unit is not much, Shure SE535LTD earplugs evaluation

Shure's SE535 is a very classic three-action iron earplug. I thought it would be the flagship configuration a few years ago. Now, this year is more than a man, it is really embarrassing, and it has set off its flagship flag in SE846. After that, 535 was really left out for a while, but the classic is classic after all, the sound quality is good enough, or won the favor of many players.

Later, Shure officially launched the SE535LTD red limited edition. The biggest difference is the color change. The difference between the roots and the parameters is very small. The impedance is 36Ω and the sensitivity is 119dB. The frequency range of the normal version of the SE535 is 18Hz. -19kHz, and SE535LTD is 18Hz-19.5kHz, which is the difference of the frequency response range of 0.5kHz.

In addition, SE535LTD uses a new wire.

Still adhere to the principle of each flower into the eyes, do not evaluate the appearance too much, is still a classic ear hook design, still replaceable wire.

First of all, Shure's current full range of headphones are very comfortable to wear, and the workmanship has made great progress, both the original version and the LTD version, are very good.

There are many accessories for SE535LTD. There are four types of earmuffs. There are four types of earmuffs. Different earmuffs will have different sound performances, especially low frequency changes.

In fact, SE535LTD is a fine-tuned version based on the original version. I think many players say that it is the difference between one ear (meaning that the sound is very different), but I personally listened carefully: SE535LTD was debugged more evenly, which may be Because of the 0.5kHz frequency response range, the SE535LTD's high-frequency extension is better, and it is brighter at very high frequencies, so it becomes a claw. This may cause many people to think that its intermediate frequency is less. However, in fact, SE535LTD's intermediate frequency is more delicate than the normal version. Listening to the human voice is still strong, and it has not changed the status of its excellent vocal plugs. In addition, it is the low frequency, the sense of volume is more sufficient, but it is still the low frequency and speed of the moving iron. Fast, tough.

iPhone6 ​​direct push SE535LTD is no pressure, 36Ω impedance, 119dB sensitivity is really not so difficult, but the sound of iPhone6 ​​with SE535LTD is indeed normal, the sound lacks layering, it sounds really not strong, so if there is a higher Demand, it must be the player or the portable amp, the change in sound will be very obvious.

to sum up:

SE535LTD is still a fairly balanced earplug. This level of earplugs is usually enough to listen to a song. Although many people think that its low frequency is low, it lacks the ability to dive, but it still looks at the listening orientation to see if it is suitable. Deduct the style of music you like, after all, it is the problem you need, listen to your own music, don't care too much about others.

Written at the end:

The earphone is for listening to yourself. It uses several units to promote the same CPU with a few cores. The core does not mean that the performance is good. First of all, the quality of the core is different. Every level, so you can see that a lot of 8 core Android phones don't have 2 core iPhones, so it's said that this is bigger than the actual performance. It may be a bit far, but it turns to the same on the moving iron headphones. Applicable, the most important thing to buy headphones is the "sound itself" instead of how many units are used, bring your own audio equipment to the headset store, plug in the headphones of interest, listen to your own music, and receive the ear is always the most reliable. select.